fork joint Rapid H519 - Ø30mm
Skip image gallery
ipx.loginNoteText
Product information "fork joint Rapid H519 - Ø30mm"
Usage possibilities:
Fork joint for over-centre tensioner H519.
Attachment notes:
The fork joint is welded to the shaft or fastened by using a dowel pin. The hole required for this must be drilled by yourself.
Surface: fork joint raw
accessories galvanised
Weight: 0.23 kg
Fork joint for over-centre tensioner H519.
Attachment notes:
The fork joint is welded to the shaft or fastened by using a dowel pin. The hole required for this must be drilled by yourself.
Surface: fork joint raw
accessories galvanised
Weight: 0.23 kg
Skip product gallery
Similar Products
shaft joint Rapid H519 light - Ø20mm
To the product
Usage possibilities:Shaft joint for over-centre tensioner H519 light.Attachment notes:The shaft joint is welded onto the shaft or fastened by using a dowel pin. The hole required for this must be drilled by yourself.Surface: shaft joint rawaccessories galvanisedWeight: 0.16 kg
From €1.19*
Skip product gallery
Recommended Products
over-centre tensioner Rapid H519 - L=55mm - left
To the product
Usage possibilities:Over-centre tensioner for all central locks with a shaft diameter of 20, 25, 30 and 35 mm.Advantages:Pressure can be adjusted and readjusted, therefore no additional lock is required.Attachment notes:The over-centre tensioner is fastened to the lower edge of the frame profile or to the floor profile.Surface: rawWeight: 2.45 kg
From €1.19*
over-centre tensioner Rapid H519 lateral - Ø20mm - left
To the product
Usage possibilities:Over-centre tensioner for all central locks with a shaft diameter of 20, 25, 30 and 35 mm.Advantages:Pressure can be adjusted and readjusted, therefore no additional lock is required.Attachment notes:The over-centre tensioner is attached to the frame profile on the headboard. The shaft of the central lock is mounted on the base plate of the tensioner.Surface: rawWeight: 2.80 kg
From €1.19*
over-centre tensioner Rapid H519 lateral - lever long below - Ø30mm - left
To the product
Usage possibilities:Over-centre tensioner for all central locks with a shaft diameter of 30 or 35 mm.Advantages:Pressure can be adjusted and readjusted, therefore no additional lock is required.Attachment notes:The over-centre tensioner is attached to the frame profile on the headboard. The shaft of the central lock is mounted on the base plate of the tensioner.Surface: rawWeight: 2.89 kg
From €1.19*
over-centre tensioner Rapid H519 lateral - lever long above - Ø30mm - left
To the product
Usage possibilities:Over-centre tensioner for all central locks with a shaft diameter of 30 or 35 mm.Advantages:Pressure can be adjusted and readjusted, therefore no additional lock is required.Attachment notes:The over-centre tensioner is attached to the frame profile on the headboard. The shaft of the central lock is mounted on the base plate of the tensioner.Surface: rawWeight: 2.88 kg
From €1.19*