locking unit Record H11 behind - left
Skip image gallery
ipx.loginNoteText
locking unit Record H11 behind - left
Item number:
013.700.201
Product information "locking unit Record H11 behind - left"
Usage possibilities:
Locking unit for pendulum lock H11.
Notes:
Suitable only for the tailgate!
Attachment notes:
The locking unit is pushed into the pendulum bearing and screwed to the operating unit in the desired length using the turnbuckle.
Surface: galvanised
Weight: 1.04 kg
Locking unit for pendulum lock H11.
Notes:
Suitable only for the tailgate!
Attachment notes:
The locking unit is pushed into the pendulum bearing and screwed to the operating unit in the desired length using the turnbuckle.
Surface: galvanised
Weight: 1.04 kg
Skip product gallery
Similar Products
locking unit Record H10G behind - left
To the product
Usage possibilities:Locking unit for pendulum lock H10G.Notes:Suitable only for the tailgate!Attachment notes:The locking unit is pushed into the pendulum bearing and screwed to the operating unit in the desired length using the turnbuckle.Surface: galvanisedWeight: 0.73 kg
From €1.19*
Skip product gallery
Recommended Products
turnbuckle H10G / H11 / H519 - L=55mm
To the product
Usage possibilities:Turnbuckle for the pendulum lock H10G/H11 as well as the over-centre tensioner H519.Notes:Further lengths and surfaces on request.Attachment notes:The turnbuckle is equipped with an M12 thread on both the right and left. It is screwed to the respective link accordingly.Surface: galvanisedWeight: 0.09 kg
From €1.19*
pendulum lock Record H11 behind - L=55mm - left
To the product
Usage possibilities:Pendulum lock for tipper, semitrailers and trailers with centre and corner pillars with aluminium or steel side boards.Notes:Suitable only for the tailgate!Advantages:Due to the rotation by 90°, the operator stands to the side of the side board when opening the lock. This reduces the risk of injury. Pleasant operating heightAttachment notes:The pendulum bearing is welded on the pillar. The operating part can be screwed or welded. The corresponding screwing points are centre-punched and must be drilled by yourself if necessary.Surface: galvanised pendulum bearing: rawWeight: 3.10 kg
From €1.19*
operating part Record H10G / H11
To the product
Usage possibilities:Operating unit for the pendulum locks H10G/H11.Attachment notes:The operating unit can be screwed or welded. The corresponding screwing points are centre-punched and must be drilled by yourself if necessary.Surface: galvanisedWeight: 0.77 kg
€1.19*
pendulum bearing Record H11 - left
To the product
Usage possibilities:Pendulum bearing for pendulum lock H11.Attachment notes:The pendulum bearing is welded on the pillar.Surface: rawWeight: 1.35 kg
From €1.19*