over-centre tensioner Rapid H519 - L=300mm - left
Skip image gallery
ipx.loginNoteText
over-centre tensioner Rapid H519 - L=300mm - left
Item number:
050.100.101
Product information "over-centre tensioner Rapid H519 - L=300mm - left"
Usage possibilities:
Over-centre tensioner for all central locks with a shaft diameter of 20, 25, 30 and 35 mm.
Advantages:
Pressure can be adjusted and readjusted, therefore no additional lock is required.
Attachment notes:
The over-centre tensioner is fastened to the lower edge of the frame profile or to the floor profile.
Surface: raw
Weight: 2.45 kg
Over-centre tensioner for all central locks with a shaft diameter of 20, 25, 30 and 35 mm.
Advantages:
Pressure can be adjusted and readjusted, therefore no additional lock is required.
Attachment notes:
The over-centre tensioner is fastened to the lower edge of the frame profile or to the floor profile.
Surface: raw
Weight: 2.45 kg
Skip product gallery
Recommended Products
fork joint Rapid H519 - Ø20mm
To the product
Usage possibilities:Fork joint for over-centre tensioner H519.Attachment notes:The fork joint is welded to the shaft or fastened by using a dowel pin. The hole required for this must be drilled by yourself.Surface: fork joint rawaccessories galvanisedWeight: 0.23 kg
From €1.19*
Skip product gallery
Similar Products
over-centre tensioner Rapid H519 light - left
To the product
Usage possibilities:Over-centre tensioner for all central locks with a shaft diameter of 20 or 25 mm.Advantages:Pressure can be adjusted and readjusted, therefore no additional lock is required.Attachment notes:The over-centre tensioner is fastened to the lower edge of the frame profile or to the floor profile.Surface: rawWeight: 1.28 kg
From €1.19*