over-centre tensioner Rapid H519 lateral - lever long below - Ø35mm - right
Skip image gallery
ipx.loginNoteText
over-centre tensioner Rapid H519 lateral - lever long below - Ø35mm - right
Item number:
050.350.108
Product information "over-centre tensioner Rapid H519 lateral - lever long below - Ø35mm - right"
Usage possibilities:
Over-centre tensioner for all central locks with a shaft diameter of 30 or 35 mm.
Advantages:
Pressure can be adjusted and readjusted, therefore no additional lock is required.
Attachment notes:
The over-centre tensioner is attached to the frame profile on the headboard. The shaft of the central lock is mounted on the base plate of the tensioner.
Surface: raw
Weight: 2.89 kg
Over-centre tensioner for all central locks with a shaft diameter of 30 or 35 mm.
Advantages:
Pressure can be adjusted and readjusted, therefore no additional lock is required.
Attachment notes:
The over-centre tensioner is attached to the frame profile on the headboard. The shaft of the central lock is mounted on the base plate of the tensioner.
Surface: raw
Weight: 2.89 kg
Skip product gallery
Recommended Products
fork joint Rapid H519 - Ø20mm
To the product
Usage possibilities:Fork joint for over-centre tensioner H519.Attachment notes:The fork joint is welded to the shaft or fastened by using a dowel pin. The hole required for this must be drilled by yourself.Surface: fork joint rawaccessories galvanisedWeight: 0.23 kg
From €1.19*
Skip product gallery
Similar Products
over-centre tensioner Rapid H519 lateral - Ø20mm - left
To the product
Usage possibilities:Over-centre tensioner for all central locks with a shaft diameter of 20, 25, 30 and 35 mm.Advantages:Pressure can be adjusted and readjusted, therefore no additional lock is required.Attachment notes:The over-centre tensioner is attached to the frame profile on the headboard. The shaft of the central lock is mounted on the base plate of the tensioner.Surface: rawWeight: 2.80 kg
From €1.19*
over-centre tensioner Rapid H519 lateral - lever long above - Ø30mm - left
To the product
Usage possibilities:Over-centre tensioner for all central locks with a shaft diameter of 30 or 35 mm.Advantages:Pressure can be adjusted and readjusted, therefore no additional lock is required.Attachment notes:The over-centre tensioner is attached to the frame profile on the headboard. The shaft of the central lock is mounted on the base plate of the tensioner.Surface: rawWeight: 2.88 kg
From €1.19*
lever Rapid H119E / H120A - Ø20mm
To the product
Usage possibilities:This operating lever is usable for all kinds of central locks with a 20, 25, 30 or 35 mm shaft.Notes:An additional security lock for the lever must be attached in every case.Attachment notes:The operating lever is pushed onto the end of the shaft and welded.Surface: rawWeight: 0.80 kg
From €1.19*