clamping finger Rapid H955 / H956
Skip image gallery
ipx.loginNoteText
clamping finger Rapid H955 / H956
Item number:
050.955.600
Product information "clamping finger Rapid H955 / H956"
Usage possibilities:
Clamping finger for central lock H955/H956.
Attachment notes:
The clamping finger is welded to the shaft.
Surface: raw
Weight: 0.55 kg
Clamping finger for central lock H955/H956.
Attachment notes:
The clamping finger is welded to the shaft.
Surface: raw
Weight: 0.55 kg
Skip product gallery
Recommended Products
bearing Rapid H955 / H956
To the product
Usage possibilities:Bearing for central lock H955/H956.Attachment notes:The bearing is welded in the base frame.Surface: rawWeight: 0.66 kg
€1.19*
hinge Rapid H955 with M12
To the product
Usage possibilities:Central lock for 30 mm aluminium clip, tie rod boards or 40 mm aluminium clip boards with 30 mm offset lower end profile for central lock H955.Attachment notes:The hinge is fastened to the side board by using a threaded plate and 2 or 4 screws. The holes in the hinge for the lower screws must be drilled by yourself. In addition, an M12 tie rod can be used.Surface: galvanisedWeight: 1.06 kg
€1.19*
hinge Rapid H956
To the product
Usage possibilities:Hinge for tipper with aluminium sideboards with a lower end profile of 60 mm for central lock H956.Attachment notes:The hinge is fastened to the side board by using a threaded plate.Surface: galvanisedWeight: 1.20 kg
€1.19*