hinge Rapid H955 with M12
Skip image gallery
ipx.loginNoteText
Product information "hinge Rapid H955 with M12"
Usage possibilities:
Central lock for 30 mm aluminium clip, tie rod boards or 40 mm aluminium clip boards with 30 mm offset lower end profile for central lock H955.
Attachment notes:
The hinge is fastened to the side board by using a threaded plate and 2 or 4 screws. The holes in the hinge for the lower screws must be drilled by yourself. In addition, an M12 tie rod can be used.
Surface: galvanised
Weight: 1.06 kg
Central lock for 30 mm aluminium clip, tie rod boards or 40 mm aluminium clip boards with 30 mm offset lower end profile for central lock H955.
Attachment notes:
The hinge is fastened to the side board by using a threaded plate and 2 or 4 screws. The holes in the hinge for the lower screws must be drilled by yourself. In addition, an M12 tie rod can be used.
Surface: galvanised
Weight: 1.06 kg
Skip product gallery
Recommended Products
bearing Rapid H955 / H956
To the product
Usage possibilities:Bearing for central lock H955/H956.Attachment notes:The bearing is welded in the base frame.Surface: rawWeight: 0.66 kg
€1.19*
clamping finger Rapid H955 / H956
To the product
Usage possibilities:Clamping finger for central lock H955/H956.Attachment notes:The clamping finger is welded to the shaft.Surface: rawWeight: 0.55 kg
€1.19*
threaded plate Rapid H902 / H955
To the product
Usage possibilities:Threaded plate for the hinges H902 and H955.Attachment notes:The threaded plate is pushed into the hollow chamber of the side board profile and screwed to the hinge.Surface: galvanisedWeight: 0.05 kg
€1.19*
tie rod 615mm
To the product
Usage possibilities:The tie rod is suitable for all side board profiles and hinges with an existing tie rod hole. It is used for additional stabilisation.Notes:M12 threadthread length 50 mm19 AFother lengths possible on requestAttachment notes:The tie rod is inserted into the side board profile from above and screwed in the hinge.Surface: galvanisedWeight: 0.53 kg
€1.19*
shank nut
To the product
Usage possibilities:The shank nut is suitable for all tie rod side boards with which a threaded rod is used instead of a tie rod.Notes:M12 thread 22 AFAttachment notes:The shank nut is screwed onto the threaded rod inserted in the side board.Surface: galvanisedWeight: 0.04 kg
€1.19*