hinge Rapid H119E/130 - SB=25mm
Skip image gallery
ipx.loginNoteText
hinge Rapid H119E/130 - SB=25mm
Item number:
051.119.230
Product information "hinge Rapid H119E/130 - SB=25mm"
Usage possibilities:
Hinge for central lock H119E for 25mm & 30mm aluminum sideboards.
Attachment notes:
The hinge is fastened to the side board by using an M12 tie rod as well as 2 or optionally 4 screws. The holes required for this must be drilled by yourself.
Surface: galvanised
Weight: 0.86 kg
Hinge for central lock H119E for 25mm & 30mm aluminum sideboards.
Attachment notes:
The hinge is fastened to the side board by using an M12 tie rod as well as 2 or optionally 4 screws. The holes required for this must be drilled by yourself.
Surface: galvanised
Weight: 0.86 kg
Skip product gallery
Recommended Products
bearing Rapid H119E with clamping finger
To the product
Usage possibilities:Lower central lock for vehicles with "Schwerter" frame profile or similar for all hinges from the central lock series H119E.Notes:The welding of the bearing to a plate with drill holes enables it to be screwed to the frame.Attachment notes:The unit is welded in the base frame. Pipes are pushed over the ends of the shaft stub and welded accordingly.Surface: rawWeight: 1.20 kg
€1.19*
clamping finger Rapid H119E
To the product
Usage possibilities:Clamping finger for central lock H119E.Attachment notes:The clamping finger is welded to the shaft.Surface: rawWeight: 0.23 kg
€1.19*
bearing Rapid H119E
To the product
Usage possibilities:Bearing for central lock H119E.Notes:The welding of the bearing to a plate with drill holes enables it to be screwed to the frame.Attachment notes:The bearing is welded in the base frame.Surface: rawWeight: 0.56 kg
€1.19*
tie rod 615mm
To the product
Usage possibilities:The tie rod is suitable for all side board profiles and hinges with an existing tie rod hole. It is used for additional stabilisation.Notes:M12 threadthread length 50 mm19 AFother lengths possible on requestAttachment notes:The tie rod is inserted into the side board profile from above and screwed in the hinge.Surface: galvanisedWeight: 0.53 kg
€1.19*
shank nut
To the product
Usage possibilities:The shank nut is suitable for all tie rod side boards with which a threaded rod is used instead of a tie rod.Notes:M12 thread 22 AFAttachment notes:The shank nut is screwed onto the threaded rod inserted in the side board.Surface: galvanisedWeight: 0.04 kg
€1.19*