Rapid Record | tie rod | tie rod 615mm

hinge bearing Rapid 25/30 with M12

Usage possibilities:Hinge bearing for 25 mm & 30 mm aluminium or steel side boards.Notes:If a 25 mm side board is used, the number 25 must be visible on the outside of the hinge. Accordingly, the number 30 must be visible in the case of a 30 mm side board.Attachment notes:The hinge bearing is screwed to the side board by using a threaded plate. We recommend M8 cylinder head bolts according to DIN 912 for this. In addition, a tie rod with an M12 thread can be used.Surface: galvanisedWeight: 0.27 kg

€1.19*

To the product

hinge bearing Rapid H55

Usage possibilities:Hinge bearing for 25 mm & 30 mm aluminium or steel side boards.Notes:If a 25 mm side board is used, the number 25 must be visible on the outside of the hinge. Accordingly, the number 30 must be visible in the case of a 30 mm side board.Attachment notes:The hinge bearing is screwed to the side board by using a threaded plate. We recommend M8 cylinder head bolts according to DIN 912 for this. In addition, a tie rod with an M12 thread can be used.Surface: galvanisedWeight: 0.40 kg

€1.19*

To the product

hinge bearing Rapid H90

Usage possibilities:Hinge bearing for 25 mm & 30 mm aluminium or steel side boards.Notes:If a 25 mm side board is used, the number 25 must be visible on the outside of the hinge. Accordingly, the number 30 must be visible in the case of a 30 mm side board.Attachment notes:The hinge bearing is screwed to the side board by using a threaded plate. We recommend M8 cylinder head bolts according to DIN 912 for this. In addition, a tie rod with an M12 thread can be used.Surface: galvanisedWeight: 0.50 kg

€1.19*

To the product

hinge bearing Rapid C6

Usage possibilities:Hinge bearing for 25 mm & 30 mm aluminium or steel side boards.Notes:If a 25 mm side board is used, the number 25 must be visible on the outside of the hinge. Accordingly, the number 30 must be visible in the case of a 30 mm side board.Attachment notes:The hinge pin is fastened to the side board by using a tie rod with an M12 thread.Surface: galvanisedWeight: 0.21 kg

€1.19*

To the product

hinge pin Rapid H871K/24

Usage possibilities:Hinge pin for 25 mm aluminium side boards.Notes:22 mm offset between base frame and folded-down 25 mm side board.Attachment notes:The hinge pin is screwed to the side board by using a threaded plate. We recommend M8 cylinder head bolts according to DIN 912 for this. In addition, a tie rod with an M12 thread can be used.Surface: galvanisedWeight: 0.38 kg

€1.19*

To the product

hinge pin Rapid TIR with M12

Usage possibilities:Hinge pin for 25 mm & 30 mm aluminium or steel side boards.Notes:The pin is rotated by 180° if a 30 mm side board is used.Attachment notes:The hinge pin is screwed to the side board by using a threaded plate. We recommend M8 cylinder head bolts according to DIN 912 for this. In addition, a tie rod with an M12 thread can be used.Surface: galvanisedWeight: 0.41 kg

€1.19*

To the product

hinge Rapid H955 with M12

Usage possibilities:Central lock for 30 mm aluminium clip, tie rod boards or 40 mm aluminium clip boards with 30 mm offset lower end profile for central lock H955.Attachment notes:The hinge is fastened to the side board by using a threaded plate and 2 or 4 screws. The holes in the hinge for the lower screws must be drilled by yourself. In addition, an M12 tie rod can be used.Surface: galvanisedWeight: 1.06 kg

€1.19*

To the product

hinge Rapid H902 - without M12

Usage possibilities:For tipper with pallet width and 30 mm aluminium sideboards for central lock H902.Attachment notes:The hinge is fastened to the side board by using a threaded plate and 4 screws. The holes in the hinge must be drilled by yourself. In addition, an M12 tie rod can be used.Surface: galvanisedWeight: 0.96 kg

From €1.19*

To the product

hinge pin Rapid TIR with locking pin

Usage possibilities:Hinge pin for 25 mm & 30 mm aluminium side boards.Notes:The bearing is rotated by 180° if a 30 mm side board is used.Attachment notes:The hinge pin is fastened to the side board by using a tie rod with an M12 thread.Surface: galvanisedWeight: 0.32 kg

€1.19*

To the product

hinge Rapid H119E/130 - SB=25mm

Usage possibilities:Hinge for central lock H119E for 25mm & 30mm aluminum sideboards.Attachment notes:The hinge is fastened to the side board by using an M12 tie rod as well as 2 or optionally 4 screws. The holes required for this must be drilled by yourself.Surface: galvanisedWeight: 0.86 kg

From €1.19*

To the product

hinge bearing Rapid H70

Usage possibilities:Hinge bearing for 25 mm & 30 mm aluminium or steel side boards.Notes:If a 25 mm side board is used, the number 25 must be visible on the outside of the hinge. Accordingly, the number 30 must be visible in the case of a 30 mm side board.Attachment notes:The hinge bearing is screwed to the side board by using a threaded plate. We recommend M8 cylinder head bolts according to DIN 912 for this. In addition, a tie rod with an M12 thread can be used. Surface: galvanisedWeight: 0.45 kg

€1.19*

To the product

hinge Rapid H119E Alu-K30/13 - SB=25mm

Usage possibilities:Hinge for central lock H119E for 25mm & 30mm aluminum sideboards.Attachment notes:The hinge is fastened to the sideboard by using an M12 tie rod as well as 2 screws. The holes required for this must be drilled by yourself.Surface: galvanisedWeight: 0.57 kg

From €1.19*

To the product

hinge Rapid H119E Alu-K30/13 - SB=25mm

Usage possibilities:Hinge for central lock H119E for 25mm & 30mm aluminum sideboards.Attachment notes:The hinge is fastened to the sideboard by using an M12 tie rod as well as 4 rivets. The holes for the rivets already exist.Surface: galvanisedWeight: 0.88 kg

From €1.19*

To the product

tie rod 615mm

tie rod 615mm

Product information "tie rod 615mm"