hinge pin Rapid H871K/24
Skip image gallery
ipx.loginNoteText
Product information "hinge pin Rapid H871K/24"
Usage possibilities:
Hinge pin for 25 mm aluminium side boards.
Notes:
22 mm offset between base frame and folded-down 25 mm side board.
Attachment notes:
The hinge pin is screwed to the side board by using a threaded plate. We recommend M8 cylinder head bolts according to DIN 912 for this. In addition, a tie rod with an M12 thread can be used.
Surface: galvanised
Weight: 0.38 kg
Hinge pin for 25 mm aluminium side boards.
Notes:
22 mm offset between base frame and folded-down 25 mm side board.
Attachment notes:
The hinge pin is screwed to the side board by using a threaded plate. We recommend M8 cylinder head bolts according to DIN 912 for this. In addition, a tie rod with an M12 thread can be used.
Surface: galvanised
Weight: 0.38 kg
Skip product gallery
Recommended Products
threaded plate Rapid universal
To the product
Usage possibilities:Universal threaded plate for various hinges.Attachment notes:The threaded plate is pushed into the hollow chamber of the side board profile and screwed to the hinge.Surface: galvanisedWeight: 0.12 kg
€1.19*
threaded plate Rapid H871K/24
To the product
Usage possibilities:Threaded plate for the hinge pin H871K/24.Attachment notes:The threaded plate is pushed into the hollow chamber of the side board profile and screwed to the hinge.Surface: galvanisedWeight: 0.09 kg
€1.19*
hinge bearing Rapid H871K/24 for welding
To the product
Usage possibilities:Hinge bearing for 25 mm aluminium side boards.Notes:22 mm offset between base frame and folded-down 25 mm side board.Attachment notes:The hinge bearing is welded all round to the base frame.Surface: rawWeight: 0.45 kg
€1.19*
hinge bearing Rapid H871K/24 for screwing
To the product
Usage possibilities:Hinge bearing for 25 mm aluminium side boards.Notes:22 mm offset between base frame and folded-down 25 mm side board.Attachment notes:The hinge bearing is screwed to the base frame with two screws.Surface: galvanisedWeight: 0.42 kg
€1.19*
shank nut
To the product
Usage possibilities:The shank nut is suitable for all tie rod side boards with which a threaded rod is used instead of a tie rod.Notes:M12 thread 22 AFAttachment notes:The shank nut is screwed onto the threaded rod inserted in the side board.Surface: galvanisedWeight: 0.04 kg
€1.19*
tie rod 615mm
To the product
Usage possibilities:The tie rod is suitable for all side board profiles and hinges with an existing tie rod hole. It is used for additional stabilisation.Notes:M12 threadthread length 50 mm19 AFother lengths possible on requestAttachment notes:The tie rod is inserted into the side board profile from above and screwed in the hinge.Surface: galvanisedWeight: 0.53 kg
€1.19*