DO YOU HAVE QUESTIONS OR SUGGESTIONS?
Then contact us and we will be happy to help!
bearing Rapid H120A - Ø30mm
To the product
Usage possibilities:Bearing for central lock H120A.Attachment notes:The bearing is welded in the base frame.Surface: rawWeight: 0.39 kg
From €1.19*
clamping finger Rapid H120A - Ø25mm
To the product
Usage possibilities:Clamping finger for central lock H120A.Attachment notes:The clamping finger is welded to the shaft.Surface: rawWeight: 0.36 kg
From €1.19*
fork joint Rapid H519 - Ø30mm
To the product
Usage possibilities:Fork joint for over-centre tensioner H519.Attachment notes:The fork joint is welded to the shaft or fastened by using a dowel pin. The hole required for this must be drilled by yourself.Surface: fork joint rawaccessories galvanisedWeight: 0.23 kg
From €1.19*
hinge Rapid H120A - Ø20mm
To the product
Usage possibilities:Hinge for aluminium or steel sideboards.Attachment notes:In the case of steel sideboards, the hinge is welded directly to them. In the case of aluminium sideboards, the hinge is welded in a top-hat profile, which is then riveted to the side board.Surface: rawWeight: 0.55 kg
From €1.19*
hinge Rapid H120A - Ø20mm - left
To the product
Usage possibilities:Hinge for aluminium or steel sideboards for the central lock H120A.Attachment notes:In the case of steel side boards, the hinge is welded directly to them. In the case of aluminium side boards, the hinge is welded in a top-hat profile, which is then riveted to the side board.Surface: rawWeight: 0.78 kg
From €1.19*
over-centre tensioner Rapid H519 - L=300mm - right
To the product
Usage possibilities:Over-centre tensioner for all central locks with a shaft diameter of 20, 25, 30 and 35 mm.Advantages:Pressure can be adjusted and readjusted, therefore no additional lock is required.Attachment notes:The over-centre tensioner is fastened to the lower edge of the frame profile or to the floor profile.Surface: rawWeight: 2.45 kg
From €1.19*