OUR PORTFOLIO
WE REALIZE YOUR PROJECT
Custom cast and forged parts from various industrial sectors. We work with you to realize your projects – from the initial idea to the finished product.
OUR
CLASSICS
Skip product gallery
over-centre tensioner Rapid H519 - L=300mm - left
To the product
Usage possibilities:Over-centre tensioner for all central locks with a shaft diameter of 20, 25, 30 and 35 mm.Advantages:Pressure can be adjusted and readjusted, therefore no additional lock is required.Attachment notes:The over-centre tensioner is fastened to the lower edge of the frame profile or to the floor profile.Surface: rawWeight: 2.45 kg
From €1.19*
fork joint Rapid H519 - Ø30mm
To the product
Usage possibilities:Fork joint for over-centre tensioner H519.Attachment notes:The fork joint is welded to the shaft or fastened by using a dowel pin. The hole required for this must be drilled by yourself.Surface: fork joint rawaccessories galvanisedWeight: 0.23 kg
From €1.19*
hinge Rapid H955 with M12
To the product
Usage possibilities:Central lock for 30 mm aluminium clip, tie rod boards or 40 mm aluminium clip boards with 30 mm offset lower end profile for central lock H955.Attachment notes:The hinge is fastened to the side board by using a threaded plate and 2 or 4 screws. The holes in the hinge for the lower screws must be drilled by yourself. In addition, an M12 tie rod can be used.Surface: galvanisedWeight: 1.06 kg
€1.19*
hinge Rapid H956
To the product
Usage possibilities:Hinge for tipper with aluminium sideboards with a lower end profile of 60 mm for central lock H956.Attachment notes:The hinge is fastened to the side board by using a threaded plate.Surface: galvanisedWeight: 1.20 kg
€1.19*
hinge bearing Rapid 25/30 with M12
To the product
Usage possibilities:Hinge bearing for 25 mm & 30 mm aluminium or steel side boards.Notes:If a 25 mm side board is used, the number 25 must be visible on the outside of the hinge. Accordingly, the number 30 must be visible in the case of a 30 mm side board.Attachment notes:The hinge bearing is screwed to the side board by using a threaded plate. We recommend M8 cylinder head bolts according to DIN 912 for this. In addition, a tie rod with an M12 thread can be used.Surface: galvanisedWeight: 0.27 kg
€1.19*
threaded plate Rapid 25/30
To the product
Usage possibilities:Threaded plate for hinge pin 25/30.Attachment notes:The threaded plate is screwed to the hinge pin through the base frame.Surface: galvanisedWeight: 0.05 kg
€1.19*
hinge pin Rapid 25/30 for screwing - galvanized
To the product
Usage possibilities:Hinge pin for 25 mm & 30 mm aluminium or steel side boards.Attachment notes:The hinge pin is screwed to the base frame by using a threaded plate. We recommend the use of M8 countersunk head screws according to DIN 7991 as well as M8 lock nuts according to DIN 985.Weight: 0.16 kg
From €1.19*
threaded plate Rapid universal
To the product
Usage possibilities:Universal threaded plate for various hinges.Attachment notes:The threaded plate is pushed into the hollow chamber of the side board profile and screwed to the hinge.Surface: galvanisedWeight: 0.12 kg
€1.19*
sideboard lock Rapid H115S - left
To the product
Usage possibilities:Sideboard lock for vehicles with and without centre and corner pillars, for aluminium, wood and steel sideboards.Advantages:Heavy, robust version. The lock is held by the locking lever, the proven hinged latch. The hinged latch is a latch that can be opened even when the lock is under very heavy loads.Attachment notes:In the case of vehicles with centre and corner pillars, the pillars are slotted. In the case of vehicles without centre and corner pillars, the locking hook of the operating lever is gripped by the catch.Surface: rawWeight: 1.90 kg
From €1.19*
sideboard lock Rapid H115A - raw - left
To the product
Usage possibilities:This universal sideboard lock is intended for vehicles with and without centre and corner pillars.Advantages:In all cases, the closing hook is held by friction. The locking lever is mounted on the operating lever. This allows the side board lock to be operated with just one hand, although the locking lever also has to be opened or closed.Attachment notes:In the case of vehicles with centre and corner pillars, the locking eyelet H115A is placed in front of the pillar or the pillars are slotted accordingly.Weight: 0.97 kg
From €1.19*
pendulum lock with pendulum pin Rapid H114/4,5 - left
To the product
Usage possibilities:Upright pendulum lock for three-sided tipper up to 4.5 t, agricultural vehicles or swing side board extensions up to 6 t. For vehicles without corner pillars with aluminium or steel side boards.Notes:The pendulum lock and the pendulum pin are equipped on the inside with a hook for fastening tarpaulins.Advantages:The operating lever is equipped with a cam lever lock that prevents inadvertent opening.Attachment notes:The pendulum lock is welded to the steel side board. For aluminium side boards, the pendulum lock is welded to a U-profile, which can then be riveted to the side board.Surface: rawWeight: 2.00 kg
From €1.19*
pendulum lock with pendulum pin Rapid H114ST - left
To the product
Usage possibilities:Upright pendulum lock for three-sided tipper without corner pillars from 4.5 t for aluminium and steel side boards.Notes:For fastening tarpaulins, the pendulum lock is equipped on the inside with an eyelet and the pendulum pin on the inside with a hook.Attachment notes:The pendulum lock is welded to the steel side board. For aluminium side boards, the pendulum lock is welded to a U-profile, which can then be riveted to the side board.Surface: rawWeight: 4.65 kg
From €1.19*
pendulum pin Record H10G - galvanized
To the product
Usage possibilities:Pendulum pin for pendulum bearing H10A and pendulum lock H10G.Attachment notes:The pendulum pin is pushed into the side board and screwed to it.Weight: 0.54 kg
From €1.19*
pillar lock Record H12 with bearing and eyelet - B=90mm
To the product
Usage possibilities:Heavy-duty pillar lock for foldable and removable pillars on tipper, tipper with pallet width and long material transporters.Attachment notes:The pillar lock is welded into a corresponding U-profile. The pillar bearing is welded to the base frame, which is first drilled in the appropriate place for the locking eyelet. The latter is then screwed through the base frame.Surface: rawWeight: 6.75 kg
From €1.19*
hinge bearing Rapid H871KL
To the product
Usage possibilities:Hinge bearing for small flatbed and car trailers with steel or aluminium base frame and 25 mm side board without tie rod.Notes:Accident-proof hinge fitted according to customs regulations.Attachment notes:The hinge bearing is screwed to the base frame by using a threaded plate. We recommend the use of M8 countersunk head screws according to DIN 7991 for this.Surface: galvanisedWeight: 0.16 kg
€1.19*
hinge pin Rapid H871KL
To the product
Usage possibilities:Hinge pin for small flatbed and car trailers with steel or aluminium base frame and 25 mm side board without tie rod.Notes:Accident-proof hinge fitted according to customs regulations.Attachment notes:The hinge pin is screwed to the side board by using a threaded plate. We recommend the use of M8 countersunk head screws according to DIN 7991 for this.Surface: galvanisedWeight: 0.25 kg
€1.19*
built-in tension lock Record H206N-F
To the product
Usage possibilities:Built-in tension lock for flatbed bodies with aluminium side boards.Notes:The adjustment is carried out in the open state by turning the bolt hook to compensate for differences due to assembly and wear.Advantages:Installation dimensions identical to all common built-in tension locks.Attachment notes:The built-in tension lock is riveted in the sideboard which must be milled out.Surface: galvanisedWeight: 1.89 kg
€1.19*
ABOUT THE
COMPANY
Since 1905, as a family-owned business in the fourth generation, we stand for expertise and reliability, offering our partners high-quality products for commercial vehicles, agricultural vehicles, and other industries.
Read more